If you do not find what you are looking for on this page, please contact us anyway

Our business is to help you!

·       As approved distributors for Southern Africa, JASTRAM of Germany for their BOW- AND STERN THRUSTERS, AZIMUTH THRUSTER SYSTEMS including DP (dynamic positioning) control systems, rudder propellers and other marine related equipment.

·       As approved distributors for Southern Africa, JOHNSON DURAMAX of the USA for their “DURAMAX” high quality mechanical propeller shaft sealing system, DURACOOLER keel- or grid coolers as well as high quality water lubricated RUBBER CUTLESS BEARINGS.

·   As approved marine distributors for South Africa: “ALGAE-X” total fuel system management, preventing clogged filters and unnecessary tank cleaning, provides peak engine performance, lower fuel consumption, more power, less smoke, reducing maintenance & downtime, lower operating costs and less frequent fuel filter changes. “ALGAE-X” operates on an induction principal, the process combining kinetic & magnetic energy to influence the behaviour of electrons. The correctly sized “ALGAE-X” unit installed in the fuel feed line provides a powerful magnetic field; the flow of fuel provides the kinetic energy.

·   As approved distributors for Southern Africa, MERGI organic COMBUSTION CATALYST.  When used in diesel or heavy fuel, it provides the owner with a cleaner burning engine, thereby reducing combustion deposits and exhaust emissions.  Between 5- and 10 % fuel savings on diesel engines have been achieved, especially under low load conditions.  Mixing ratio is 1 in 4,000.

·   As approved distributors for Southern Africa for C. C. JENSEN FINE FILTERS (Denmark) diesel fuel-, engine lube-oil and hydraulic oil off-line COALESCING / FINE FILTRATION SYSTEMS, (down to 3 micron absolute, 0.80 micron nominal, with large dirt & water holding capacity). Flow rates: 45- to 11,000 litres per hour. These units are very simple to operate by having their own integrated drive motor (options: 380V 3-phase, 220V single phase, 24V DC, 12 V DC, hydraulic or pneumatic) gear pump & control panel, assuring the correct flow and pressure through the coalecser / filter at all times . These units commonly replace expensive- & maintenance intensive centrifugal centrifuges or separators.

·       As approved distributors for Southern Africa, DONG-I hydraulic reverse reduction MARINE GEARBOXES, 15 models with ratios from 1.64 to 1 to 5.96 to 1 (all hydraulically clutched) ranging from 30 HP to 875 HP at 2,100 RPM, very competitively priced with a 1 year warranty.

·       As approved distributors for Southern Africa, DONG-I of Korea for their commercial and fishing vessel, HYDRAULIC STEERING SYSTEMS, including built-in rudder indicators and very compact rotary actuators, again competitively priced.

·       As approved distributors for Africa, KIWI FEATHER PROPS, the latest development in 3-bladed feathering propellers (XYTEL blades) for yachts, non-rotating under sail, without a shaft brake, at up to 15 degree shaft angle.

·       As approved distributors, ZETA / TELERINI / ROVER bronze / stainless steel reversible marine pumps, 15 mm to 50 mm, bareshaft or with a manual clutch fitted to pumps from 30 mm upwards, also available with 12- / 24 Volt DC or 220- / 380 Volt close-coupled motors fitted, alternatively, hand drilling machine driven, 15- and 20 mm ports.  All pumps again very competitively priced.

·       As approved distributors for Southern Africa, JMP Corporation for their RUBBER IMPELLER PUMPS, 1” to 2-1/2” nominal bore, with- or without electromagnetic clutch (12- or 24 volt DC), also replacement raw water pumps for Caterpillar, Cummins, Volvo, Detroit Diesel, Mitsubishi, Daewoo & Onan marine engines. Further, a range of replacement rubber impellers for: Japsco & Johnson Pumps, Yanmar, Sherwood, Vetus, Anchor & Chev marine engines.

·       As sole agents for Southern Africa, BETA MARINE propulsion engine sets 10 HP- to 173 HP, also SAILDRIVE units from 13.5 HP- to 28 HP. The propulsion engines are based on KUBOTA up to 75 HP, thereafter on FORD-IVECO.

·       BETA MARINE generating sets: 3.5 kVA to 41 kVA, based on KUBOTA diesel engines, as well as larger sets up to 1,133 kVA, based on Volvo and Cummins engines, silent sets as well as normal industrial execution.

·       As distributors for VAN DER GRAAF manually operated friction clutches, 5 models, 80- to 640 Nm, ideal for PTO drives.

·       As approved distributors for Southern Africa, “BOWMAN” (UK) engine MARINISING KITS & MARINE SHELL & TUBE COOLERS, including jacket water heat-exchanger / header tank compact units, engine- and hydraulic oil coolers, also water-cooled exhaust manifolds for most popular diesel engines.

·       As approved distributors for Southern Africa, EUROJACHT’s MT anti-vibration / flexible CV joint based propeller shaft drive systems with integral thrust bearing (similar to the “Aquadrive” unit).

·       As approved distributors for Southern Africa, STEYR, of Austria, for their high speed, ultra lightweight, very fuel efficient & quite running marine diesel engines, 65 HP to 260 HP.

·       Supplier of the range of heavy duty, reliable marine engines made by JOHN DEERE, 75 HP to 450 HP.

·       As approved distributors for Southern Africa, DULGER (through STEYR) transom mounted direct stern drives for high-speed craft, HP range up to 300 HP per drive.

·       As approved distributors for Southern Africa for NORSAFE of Norway for their classification society approved lifeboats, fast rescue boats, launching / man-riding davits.

·       PROPELLERS from 12 inch to 36-inch diameter, (2-, 3-, 4-and 5-bladed, R/H and L/H rotation as well as 2- and 3 blade folding and feathering type) in Manganese- as well as Aluminium Nickel Bronze, most standard sizes normally ex stock.

·       Propeller, gearbox & drive train CALCULATIONS / SIZING, using the well-proven HYDROCOMP Inc. (USA) “PropExpert” computer software.

·       COMPLETE STERNGEAR, including brass stern bearings, water lubricated cutlass bearings (both in Phenolic- and brass shells, metric and imperial sizes, 20 mm to 6 1/2 inch in stock), sterntubes and brass stuffing boxes, both rigid and flexible.

·       PROPELLER SHAFTS in 304-, 316-, high tensile F51 DUPLEX stainless steel or, high tensile MARINEMET 22 -25, including hollow shafts for CP systems.

·       Propeller shaft couplings, brass propeller nuts, anode nuts, and S/S lock washers, all manufactured in-house.

·       NorSap wheelhouse chairs, various models are available.

·       “SPURS” rope- or weed cutters for fitting to the propeller shaft.

·       “Kort” nozzles.

·       Propeller repairs and pitch modifications or diameter changes.

·       P- and A-brackets, glass-in as well as palm-mount.

·       EXALTO, CENTAFLEX & AMARTECH flexible propeller shaft couplings capable of absorbing propeller thrust as well as radial & axial misalignment.

·       NOVIBRA, METALASTIC CUSHYFLOAT and EXALTO flexible engine- & machinery mountings.

·       Flexible exhaust bellows and piping.

·       Keel- or Grid coolers as well as Box coolers, make DURACOOLER, made by Duramax Marine in the USA.

·       Sea water strainers from ½” to 3” NB both in plastic- and bronze casings with plastic or stainless steel strainer cages.

·         Bronze sea water intake scoops, skin fittings, seacocks, overboard fittings.

·         Stainless steel, plastic or GRP exhaust water-locks mufflers and transom exhaust connections.

·       Engineroom blowers / ventilation fans, (12- and 24 Volt) bilge alarms and float switches.

·       Windows, (fixed & opening) portholes & hatches.

·       Zinc anodes as well as shaft anodes.

·       Fuel filters as well as fuel / water separators and piping (SEPAR or RACOR).

·       Fuel- and water fillers as well as breathers (EXALTO).

·       Deck cowl and shell ventilators (EXALTO).

·       Batteries, battery switches (EXALTO), battery boxes and battery cables.

·       Navigation lights, light fittings and switches. (AQUA SIGNAL, DEN HAAN, AAA)

·       Anchor windlasses, manual, 12- and 24 Volt as well as hydraulically driven.

·       Mooring cleats, anchors and anchor chain.

·       Steering cables.

·       Safety equipment including first-aid kits and DAIKO compasses.

·       New and second-hand reconditioned marine and industrial engines as well as gensets.

·       Engine and gearbox controls as well as cables. Control cables can be made up in house to customers’ requirements. Control cable modifications and repairs done in house.

·       LINERITE II COMPOSITE BATTERBOARD for use as high impact fendering and a low friction, high load bearing material, also RUBBER FENDERING SYSTEMS made by Duramax Marine in the USA.

·       We can also supply TUCAL flake icemakers with 2.5- or 3.0 MT per 24 hours capacity, made for sea- & freshwater operation, also their horizontal- & vertical, high quality, plate freezers as well as block ice makers.

·       We can further supply the AMARTECH & EXALTO (Holland) product range of marine equipment.

·       We have access to a large range of second-hand, reconditioned marine gearboxes as well as engines, both water- and air-cooled.

We pride ourselves that most of the above small boat items are normally in stock or available at short delivery times.